PALLET LOT: (3) BOXES OF BLACK IRON THREADED PIPE FITTINGS & NIPPLES - ELBOWS, TEES, COUPLINGS, REDUCERS, SHORT & LONG NIPPLES, APPROX. 1/2 IN. TO 2 IN. (SEVERAL HUNDRED PIECES) ITEM DETAILS: ONE LOT: EVERYTHING ON THE PALLET. THREE BOXES OF BLACK MALLEABLE IRON THREADED PIPE FITTINGS AND BLACK STEEL PIPE NIPPLES, SIZES MOSTLY APPROX. 1/2 IN. TO 2 IN.: (1) A LARGE BOX PACKED WITH 90° AND 45° ELBOWS, TEES, COUPLINGS, BELL REDUCERS, STREET ELBOWS AND A FEW GALVANIZED PIECES; (2) A BOX OF CLOSE AND SHORT BLACK NIPPLES APPROX. 2 TO 6 IN. LONG; (3) A BOX OF LONG BLACK NIPPLES APPROX. 8 TO 12 IN. LONG, MANY WITH RETAIL TAGS STILL ON, PLUS A FEW TEES AND ELBOWS. SEVERAL HUNDRED PIECES TOTAL. USEFUL FOR A PLUMBING, GAS, STEAM / HYDRONIC OR FIRE SPRINKLER CONTRACTOR, A SHOP STOCK-UP, OR INDUSTRIAL PIPE FURNITURE, SHELVING AND LIGHTING BUILDS. UNUSED SHOP STOCK; SURFACE RUST ON MANY FROM STORAGE (THE THREADS ARE CLEAN); SOME PAINT MARKS. SOLD AS-IS. EST. RETAIL (ESTIMATE) FOR THE ASSORTMENT, ABOUT $900. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

(8) HEAVY-DUTY RECYCLED RUBBER MODULAR SPEED BUMP / SPEED HUMP SECTIONS, BLACK WITH YELLOW REFLECTIVE PANELS, APPROX. 35 X 19 X 2-1/2 IN. - NEW, UNUSED - PER PIECE X8 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 8. EIGHT HEAVY-DUTY MOLDED RECYCLED-RUBBER MODULAR SPEED BUMP / SPEED HUMP SECTIONS, BLACK WITH HIGH-VISIBILITY YELLOW ANTI-SKID REFLECTIVE PANELS. EACH SECTION APPROX. 35 IN. LONG X 19 IN. WIDE X APPROX. 2-1/2 IN. TALL AT THE CROWN (MEASURED), WITH A GENTLY ARCHED LOW-PROFILE CROWN, INTERLOCKING TONGUE-AND-GROOVE ENDS TO JOIN SECTIONS INTO A FULL-WIDTH BUMP, AND STEEL-SLEEVED LAG-BOLT HOLES FOR MOUNTING TO ASPHALT OR CONCRETE. FOR PARKING LOTS, GARAGES, DRIVEWAYS, WAREHOUSES, SCHOOLS AND PRIVATE ROADS. NEW, UNUSED, EXCELLENT CONDITION; MOUNTING HARDWARE AND END CAPS NOT INCLUDED. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE COMMERCIAL RUBBER SPEED HUMP SECTIONS, ABOUT $89 EACH (8 X $89 = $712.00). BID BASIS: PER PIECE X8; QTY: 8; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(8) DIAMOND CORE DRILL BITS, WET, 1-1/4 IN.-7 THREAD: (3) 6 IN., (2) 5 IN., (2) 4-1/2 IN. & (1) 3 IN. - USED - PER PIECE X8 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER BIT, TIMES 8. EIGHT WET DIAMOND CORE DRILL BITS FOR CONCRETE, BLOCK AND MASONRY, WITH STANDARD 1-1/4 IN.-7 UNC THREADED CONNECTIONS (FITS HILTI DD, HUSQVARNA, MILWAUKEE AND MOST CORE RIGS): (3) 6 IN., (2) 5 IN., (2) 4-1/2 IN. AND (1) 3 IN. (SIZES MARKED ON EACH), APPROX. 14 TO 18 IN. LONG BARRELS. SEGMENTED DIAMOND CROWNS WITH USABLE SEGMENT HEIGHT REMAINING. A GREAT SECOND SET FOR THE HILTI DD 250 CORE RIG IN LOT 6; SEE ALSO THE CORE BITS IN LOT 200. USED: RUST, PAINT AND SLURRY ON THE BARRELS; SEGMENTS WORN TO VARYING DEGREES; SOLD AS-IS. EST. RETAIL (NEW) BASED ON COMPARABLE WET DIAMOND CORE BITS OF THESE SIZES (ABOUT $140 TO $300 EACH), AVERAGING ABOUT $200 EACH (8 X $200 = $1,600). USED VALUE IS A FRACTION OF NEW. BID BASIS: PER PIECE X8; QTY: 8; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

TRIM-TEX 5/8 IN. J-BEAD, 10 FT. - FULL CASE OF 50 PIECES (#1210) - NEW ITEM DETAILS: FULL FACTORY CASE OF TRIM-TEX #1210 5/8 IN. J-BEAD, 10 FT. LENGTHS, 50 PIECES (500 LINEAR FEET). RIGID VINYL DRYWALL TRIM FOR FINISHING EXPOSED DRYWALL EDGES AGAINST WINDOWS, DOORS, MASONRY AND OTHER SURFACES - WILL NOT RUST OR DENT LIKE METAL BEAD. MADE IN THE USA. NEW, UNUSED, IN THE ORIGINAL TRIM-TEX CARTON. SOLD AS ONE FULL CASE. BID BASIS: LOT (CASE OF 50); QTY: 1; SOLD AS ONE LOT.

(10) BAGS GRAYMONT IVORY AUTOCLAVED FINISH LIME (TYPE S HYDRATED LIME), 50 LB. - PER BAG X10 (2 OF 2) ITEM DETAILS: SOLD BY THE BAG - BID IS PER BAG, TIMES 10. TEN 50 LB. (22.7 KG) BAGS OF GRAYMONT IVORY AUTOCLAVED FINISH LIME, A TYPE S HYDRATED LIME MEETING ASTM C206 / C207. AUTOCLAVING MAKES IT READY TO USE WITHOUT OVERNIGHT SOAKING. FOR PLASTER FINISH COATS, LIME PUTTY, VENEER PLASTER, AND MORTAR (TYPE S/N MASONRY MORTAR, INCLUDING TUCK-POINTING AND HISTORIC RESTORATION). APPROVED FOR USE IN NEW YORK CITY. UNOPENED BAGS ON PALLET; BAGS SHOW STORAGE DUST AND SOME WEAR. EST. RETAIL (ESTIMATE) BASED ON BUILDING-SUPPLY PRICING FOR 50 LB. TYPE S HYDRATED / FINISH LIME, ABOUT $24.98 PER BAG (10 X $24.98 = $249.80). BID BASIS: PER BAG X10; QTY: 10; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(6) BAGS USG RED TOP KEENES CEMENT, 50 LB. - NEW - PER BAG X6 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER BAG, TIMES 6. SIX 50 LB. BAGS OF USG RED TOP KEENES CEMENT, A HIGH-STRENGTH GYPSUM FINISHING PLASTER. MIXED WITH LIME PUTTY IT GIVES A HARD, SMOOTH, VERY DENSE FINISH COAT FOR VENEER AND TRADITIONAL THREE-COAT PLASTER WALLS, WHICH IS WHY IT'S THE STANDARD FOR RESTORATION AND HISTORIC PLASTER WORK. UNOPENED FACTORY BAGS, STORED INDOORS. PAIRS WELL WITH THE IVORY FINISH LIME LOTS IN THIS SALE. BID BASIS: PER PIECE X6; QTY: 6; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(5) POWER TOOLS FOR PARTS OR REPAIR - HILTI TE 50-AVR & TE 50 ROTARY HAMMERS, HILTI GX 3 GAS NAILER, RIDGID 16 GA. STRAIGHT FINISH NAILER, HDX WORK LIGHT - NOTHING OPERATIONAL + BONUS (8) HARD HAT SHELLS - ONE LOT (PALLET) ITEM DETAILS: SOLD AS ONE LOT - PARTS OR REPAIR. NOTHING OPERATIONAL - SOLD AS-IS FOR PARTS OR REPAIR. FIVE CONTRACTOR TOOLS. (1) HILTI TE 50-AVR SDS-MAX COMBIHAMMER WITH ACTIVE VIBRATION REDUCTION. (1) HILTI TE 50 SDS-MAX COMBIHAMMER. (1) HILTI GX 3 GAS-ACTUATED FASTENING TOOL FOR DRYWALL TRACK AND LIGHT-GAUGE STEEL TO CONCRETE. (1) RIDGID 16-GAUGE STRAIGHT FINISH NAILER, PNEUMATIC. (1) HDX PORTABLE HALOGEN WORK LIGHT. THESE ARE HEAVY-USE COMMERCIAL TOOLS THAT ARE OFTEN REPAIRABLE: COMMON CAUSES ARE BRUSHES, SWITCHES, CORDS AND SEALS, AND HILTI SERVICE PARTS ARE WIDELY AVAILABLE. GOOD FOR A TOOL REPAIR SHOP, HILTI OWNER NEEDING PARTS, OR A HANDY BUYER. NO WARRANTY. BONUS: (8) HARD HAT SHELLS, MSA FULL-BRIM AND CAP STYLES IN ORANGE, RED, YELLOW AND WHITE, INCLUDED AT NO EXTRA CHARGE. SHELLS ONLY, WITH NO SUSPENSIONS INSTALLED. EVERYTHING ON THE PALLET GOES TO ONE BUYER. SOLD AS FOUND. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

(8) ROLLS SMOOTH-SURFACED ASPHALT ROLL ROOFING, ONE SQUARE (100 SQ. FT.) PER ROLL - PER ROLL X8 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER ROLL, TIMES 8. EIGHT FULL ROLLS OF "REGULAR" SMOOTH-SURFACED ASPHALT ROLL ROOFING, EACH COVERING ONE SQUARE (100 SQ. FT.), FOR ABOUT 800 SQ. FT. TOTAL. USE IT FOR LOW-SLOPE ROOFS, SHEDS, BARNS, OUTBUILDINGS, OR AS AN UNDERLAYMENT OR FLASHING MEMBRANE. IT IS OLDER STOCK, RECOVERED FROM THE BUILDING CLEAR-OUT AND APPEARS NEVER INSTALLED. SOME ROLLS ARE STILL IN THEIR ORIGINAL PAPER WRAPPERS. STORED INDOORS. SOLD AS FOUND. BID BASIS: PER PIECE X8; QTY: 8; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

WHITE QUARTZ VANITY TOP, APPROX. 37 X 22 IN., WITH SQUARE WHITE CERAMIC VESSEL SINK - NEW (2 OF 3) ITEM DETAILS: POLISHED WHITE QUARTZ (ENGINEERED STONE) BATHROOM VANITY TOP WITH A FINE LIGHT-GRAY SPECKLE, APPROX. 37 IN. X 22 IN. (MEASURED), WITH A SINGLE FAUCET HOLE AND FINISHED EDGES. IT COMES WITH A NEW SQUARE WHITE GLAZED CERAMIC VESSEL (ABOVE-COUNTER) SINK, APPROX. 16 IN. SQUARE, STILL IN ITS BOX. A CLEAN MODERN LOOK FOR A BATHROOM VANITY. THE SAME TOPS AND SINKS WERE INSTALLED IN THE BON LINDELL APARTMENT BATHROOMS (SEE INSTALLED PHOTOS). NEW / UNINSTALLED. ONE OF THREE IDENTICAL LOTS. EST. RETAIL (ESTIMATE): QUARTZ 37 IN. VANITY TOP ABOUT $300 + SQUARE VESSEL SINK ABOUT $89 = ABOUT $389. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

WHITE QUARTZ VANITY TOP, APPROX. 37 X 22 IN., WITH SQUARE WHITE CERAMIC VESSEL SINK - NEW (3 OF 3) ITEM DETAILS: POLISHED WHITE QUARTZ (ENGINEERED STONE) BATHROOM VANITY TOP WITH A FINE LIGHT-GRAY SPECKLE, APPROX. 37 IN. X 22 IN. (MEASURED), WITH A SINGLE FAUCET HOLE AND FINISHED EDGES. IT COMES WITH A NEW SQUARE WHITE GLAZED CERAMIC VESSEL (ABOVE-COUNTER) SINK, APPROX. 16 IN. SQUARE, STILL IN ITS BOX. A CLEAN MODERN LOOK FOR A BATHROOM VANITY. THE SAME TOPS AND SINKS WERE INSTALLED IN THE BON LINDELL APARTMENT BATHROOMS (SEE INSTALLED PHOTOS). NEW / UNINSTALLED. ONE OF THREE IDENTICAL LOTS. EST. RETAIL (ESTIMATE): QUARTZ 37 IN. VANITY TOP ABOUT $300 + SQUARE VESSEL SINK ABOUT $89 = ABOUT $389. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

(5) ARTISTIC FINISHES BIRCH HARDWOOD THRESHOLD "B" / END MOLDING, 78 IN. - PER PIECE X5 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 5. ARTISTIC FINISHES THRESHOLD "B" (END MOLDING / BABY THRESHOLD) IN BIRCH, ITEM 6230. L-PROFILE WITH ROUNDED TOP EDGE AND LIP, ABOUT 1-1/8 IN. WIDE, 78 IN. LONG. USED TO FINISH HARDWOOD FLOORING AT DOORWAYS, SLIDING DOORS, FIREPLACE HEARTHS AND CARPET EDGES. ONE PIECE PREFINISHED NATURAL/HONEY BIRCH; OTHERS IN ORIGINAL CARTON. NEW, NEVER INSTALLED. EST. RETAIL BASED ON COMPARABLE 78 IN. SOLID HARDWOOD THRESHOLDS, ABOUT $29.99 EACH (5 X $29.99 = $149.95). BID BASIS: PER PIECE X5; QTY: 5; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(6) ARTISTIC FINISHES SANTOS MAHOGANY HARDWOOD REDUCER MOLDING, 78 IN. - PER PIECE X6 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 6. ARTISTIC FINISHES REDUCER MOLDING IN PREFINISHED SANTOS MAHOGANY (RICH REDDISH-BROWN BRAZILIAN EXOTIC HARDWOOD), ITEM 606530. ABOUT 2 IN. WIDE X 78 IN. LONG. TRANSITIONS HARDWOOD FLOORING DOWN TO A LOWER FLOOR SUCH AS VINYL OR TILE. NEW, NEVER INSTALLED. EST. RETAIL BASED ON COMPARABLE 78 IN. PREFINISHED EXOTIC HARDWOOD REDUCERS, ABOUT $39.99 EACH (6 X $39.99 = $239.94). BID BASIS: PER PIECE X6; QTY: 6; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(4) MIRAGE ENGINEERED YELLOW BIRCH COGNAC STAIR NOSING, 3/8 IN. X 2-1/2 IN. X 7 FT. - PER PIECE X4 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 4. MIRAGE (BOA-FRANC) ENGINEERED STAIR NOSING, YELLOW BIRCH IN COGNAC STAIN, SEMI-GLOSS UV-CURED ALUMINUM OXIDE FINISH. 3/8 IN. X 2-1/2 IN. X 7 FT. (84 IN.), FOR 3/8 IN. ENGINEERED FLOORING AT STAIR LANDINGS AND STEP-DOWNS. NEW, NEVER INSTALLED; ONE PIECE HAS A MINOR CHIP AT ONE CORNER OF THE UNDERSIDE LIP. EST. RETAIL BASED ON COMPARABLE PREFINISHED HARDWOOD STAIR NOSE MOLDINGS, ABOUT $69.99 EACH (4 X $69.99 = $279.96). BID BASIS: PER PIECE X4; QTY: 4; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(6) MIRAGE ENGINEERED MAPLE SIERRA CASHMERE ROUND REDUCER, 1/2 IN. X 1-1/2 IN. X 7 FT. - PER PIECE X6 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 6. MIRAGE (BOA-FRANC) ENGINEERED ROUND REDUCER MOLDING, MAPLE SIERRA IN CASHMERE COLOR, PREFINISHED WITH UV-CURED ALUMINUM OXIDE POLYURETHANE. 1/2 IN. X 1-1/2 IN. X 7 FT. (84 IN.); GROOVED EDGE FITS 1/2 IN. ENGINEERED FLOORING AND TAPERS DOWN TO A LOWER ADJOINING FLOOR. NEW, NEVER INSTALLED. EST. RETAIL BASED ON COMPARABLE PREFINISHED HARDWOOD REDUCERS, ABOUT $44.99 EACH (6 X $44.99 = $269.94). BID BASIS: PER PIECE X6; QTY: 6; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(10) MIRAGE LOCK MAPLE VIENNA ROUND REDUCER, 3/4 IN. X 2-1/4 IN. X 7 FT., SEMI-GLOSS - PER PIECE X10 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 10. MIRAGE (BOA-FRANC) LOCK ROUND REDUCER MOLDING, MAPLE VIENNA (DARK ESPRESSO-BROWN STAINED MAPLE), SEMI-GLOSS UV-CURED ALUMINUM OXIDE FINISH. 3/4 IN. X 2-1/4 IN. X 7 FT. (84 IN.); GROOVED EDGE FOR 3/4 IN. SOLID FLOORING, TAPERING TO A LOWER ADJOINING FLOOR. NEW, NEVER INSTALLED. EST. RETAIL BASED ON COMPARABLE PREFINISHED 3/4 IN. HARDWOOD REDUCERS, ABOUT $49.99 EACH (10 X $49.99 = $499.90). BID BASIS: PER PIECE X10; QTY: 10; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(5) ARTISTIC FINISHES CHERRY HARDWOOD REDUCER, 9/16 IN., 78 IN. - PER PIECE X5 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 5. ARTISTIC FINISHES 9/16 IN. REDUCER MOLDING IN PREFINISHED NATURAL CHERRY, ITEM 16014 / 2340. ABOUT 2 IN. WIDE X 78 IN. LONG; TRANSITIONS 9/16 IN. HARDWOOD OR ENGINEERED FLOORING DOWN TO A LOWER ADJOINING FLOOR. NEW, NEVER INSTALLED; LIGHT SURFACE SCUFFS ON ONE PIECE. EST. RETAIL BASED ON COMPARABLE PREFINISHED HARDWOOD REDUCERS, ABOUT $39.99 EACH (5 X $39.99 = $199.95). BID BASIS: PER PIECE X5; QTY: 5; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(10) MIRAGE LOCK MAPLE SIERRA ROUND REDUCER, 3/4 IN. X 2-1/4 IN. X 7 FT., SEMI-GLOSS - PER PIECE X10 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 10. MIRAGE (BOA-FRANC) LOCK ROUND REDUCER MOLDING, MAPLE SIERRA (WARM MEDIUM-BROWN STAINED MAPLE), SEMI-GLOSS UV-CURED ALUMINUM OXIDE FINISH. 3/4 IN. X 2-1/4 IN. X 7 FT. (84 IN.); GROOVED EDGE FOR 3/4 IN. SOLID FLOORING, TAPERING TO A LOWER ADJOINING FLOOR. NEW, NEVER INSTALLED. SAME PROFILE AS LOT 215 (MAPLE VIENNA). EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED 3/4 IN. HARDWOOD REDUCERS, ABOUT $49.99 EACH (10 X $49.99 = $499.90). BID BASIS: PER PIECE X10; QTY: 10; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(5) ARTISTIC FINISHES TIETE ROSEWOOD HARDWOOD REDUCER, 7/16 IN., 78 IN. - PER PIECE X5 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 5. ARTISTIC FINISHES 7/16 IN. REDUCER MOLDING IN PREFINISHED TIETE ROSEWOOD (RICH REDDISH-BROWN BRAZILIAN EXOTIC), ITEM 23039 / 2270. ABOUT 2 IN. WIDE X 78 IN. LONG; GROOVED EDGE FITS 7/16 IN. ENGINEERED FLOORING AND TAPERS TO A LOWER ADJOINING FLOOR. CARTON OF 5 PIECES; NEW, NEVER INSTALLED; CARTON WORN/TORN. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED EXOTIC HARDWOOD REDUCERS, ABOUT $39.99 EACH (5 X $39.99 = $199.95). BID BASIS: PER PIECE X5; QTY: 5; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(5) BRAZILIAN CHERRY (JATOBA) HARDWOOD REDUCER, LOW SHINE, 10 MM X 1-1/2 IN. X 84 IN. - PER PIECE X5 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 5. BRAZILIAN CHERRY (JATOBA) REDUCER MOLDING, PREFINISHED LOW-SHINE (SATIN) FINISH, ITEM 12944. 10 MM X 1-1/2 IN. X 84 IN. (7 FT.); GROOVED EDGE FITS 10 MM (3/8 IN.) ENGINEERED FLOORING AND TAPERS TO A LOWER ADJOINING FLOOR. RICH REDDISH-BROWN EXOTIC HARDWOOD. NEW, NEVER INSTALLED; IN ORIGINAL PLASTIC SLEEVE. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED BRAZILIAN CHERRY REDUCERS, ABOUT $44.99 EACH (5 X $44.99 = $224.95). BID BASIS: PER PIECE X5; QTY: 5; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(12) BRAZILIAN CHERRY HARDWOOD STAIRNOSE FOR 10 MM FLOORING (WODVS2TNBCH) - PER PIECE X12 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 12. BRAZILIAN CHERRY (JATOBA) PREFINISHED STAIRNOSE MOLDING FOR 10 MM (3/8 IN.) ENGINEERED FLOORING, ITEM WODVS2TNBCH. ABOUT 84 IN. LONG; ROUNDED BULLNOSE EDGE WITH GROOVED BACK TO LOCK INTO THE FLOORING AT STAIR TREADS AND LANDING STEP-DOWNS. NEW, NEVER INSTALLED. MATCHES THE BRAZILIAN CHERRY REDUCERS IN LOT 219 (SAME WOOD, SAME 10 MM FLOOR). EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED BRAZILIAN CHERRY STAIR NOSE MOLDINGS, ABOUT $59.99 EACH (12 X $59.99 = $719.88). BID BASIS: PER PIECE X12; QTY: 12; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(10) ARTISTIC FINISHES PREFINISHED DARK BROWN HARDWOOD THRESHOLD "B" / END MOLDING, 78 IN. - PER PIECE X10 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 10. ARTISTIC FINISHES THRESHOLD "B" (END MOLDING / BABY THRESHOLD), PREFINISHED DARK BROWN HARDWOOD, FINISH CODE PE, ITEM 48580. L-PROFILE WITH LIP, ABOUT 1-1/8 IN. WIDE X 78 IN. LONG. FINISHES HARDWOOD FLOORING EDGES AT SLIDING DOORS, HEARTHS, CARPET AND OTHER TRANSITIONS. SAME PROFILE AS LOT 211 (BIRCH). NEW, NEVER INSTALLED; BOX OF 10. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED 78 IN. HARDWOOD THRESHOLDS, ABOUT $34.99 EACH (10 X $34.99 = $349.90). BID BASIS: PER PIECE X10; QTY: 10; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(40) CABREUVA HARDWOOD REDUCER FOR 10 MM FLOORING (WODVS2TRCAB) - PER PIECE X40 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 40. CABREUVA (BRAZILIAN EXOTIC, WARM REDDISH-BROWN WITH FINE FIGURE) PREFINISHED REDUCER MOLDING FOR 10 MM (3/8 IN.) ENGINEERED FLOORING, ITEM WODVS2TRCAB. ABOUT 2 IN. WIDE X 84 IN. LONG; GROOVED EDGE LOCKS INTO THE FLOORING AND TAPERS TO A LOWER ADJOINING FLOOR. NEW, NEVER INSTALLED. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED EXOTIC HARDWOOD REDUCERS, ABOUT $44.99 EACH (40 X $44.99 = $1,799.60). BOX OF 40. BID BASIS: PER PIECE X40; QTY: 40; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(16) KEMPAS HARDWOOD STAIRNOSE FOR 10 MM FLOORING (WODVS2TNKEM) - PER PIECE X16 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 16. KEMPAS (MALAYSIAN EXOTIC, RICH REDDISH-BROWN WITH BOLD GRAIN) PREFINISHED STAIRNOSE MOLDING FOR 10 MM (3/8 IN.) ENGINEERED FLOORING, ITEM WODVS2TNKEM. ABOUT 84 IN. LONG; ROUNDED BULLNOSE EDGE WITH GROOVED BACK TO LOCK INTO THE FLOORING AT STAIR TREADS AND LANDING STEP-DOWNS. NEW, NEVER INSTALLED. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED EXOTIC STAIR NOSE MOLDINGS, ABOUT $59.99 EACH (16 X $59.99 = $959.84). BID BASIS: PER PIECE X16; QTY: 16; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(40) JATOBA (BRAZILIAN CHERRY) HARDWOOD QUARTER ROUND - FULL CARTON - PER PIECE X40 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 40. FULL CARTON OF 40 JATOBA (BRAZILIAN CHERRY) PREFINISHED HARDWOOD QUARTER ROUND MOLDINGS, APPROX. 84 IN. (7 FT.) EACH (ABOUT 280 LINEAR FT. TOTAL). RICH REDDISH-BROWN EXOTIC HARDWOOD; FINISHES THE GAP BETWEEN FLOORING AND BASEBOARD. NEW, UNUSED; CARTON OPENED FOR INSPECTION ONLY. MATCHES THE BRAZILIAN CHERRY REDUCERS (LOT 219) AND STAIRNOSE (LOT 220). EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED EXOTIC QUARTER ROUND, ABOUT $19.99 EACH (40 X $19.99 = $799.60). PHOTO 1 IS THE CARTON LABEL; SEE AUCTION 2 LOT 1020 PHOTOS FOR THE SAME QUARTER ROUND. BID BASIS: PER PIECE X40; QTY: 40; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(20) PREFINISHED EXOTIC HARDWOOD REDUCER MOLDING, REDDISH-BROWN, 84 IN. - PER PIECE X20 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 20. BOX OF 20 PREFINISHED SOLID HARDWOOD REDUCER MOLDINGS, WARM REDDISH-BROWN EXOTIC (SPECIES NOT MARKED; LABEL MISSING FROM BOX). ABOUT 1-3/4 IN. WIDE X 84 IN. (7 FT.) LONG; GROOVED EDGE FITS THE FLOORING AND TAPERS TO A LOWER ADJOINING FLOOR. NEW, UNUSED; BOX OPENED FOR INSPECTION. EST. RETAIL (ESTIMATE) BASED ON COMPARABLE PREFINISHED EXOTIC HARDWOOD REDUCERS, ABOUT $39.99 EACH (20 X $39.99 = $799.80). BID BASIS: PER PIECE X20; QTY: 20; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.