ANTIQUE CARVED HIGH-BACK THRONE-STYLE ARMCHAIR, JACOBEAN / WILLIAM & MARY REVIVAL, FROM THE ST. LOUIS NEW MASONIC TEMPLE (1920S) ITEM DETAILS: ANTIQUE FURNITURE - ST. LOUIS HISTORY. ORIGINAL ARMCHAIR FROM THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS (1920S, ORIGINAL TO THE BUILDING). TALL CAMEL-TOP UPHOLSTERED BACK IN A LODGE/"THRONE" STYLE; SWEEPING SCROLLED ARMS WITH CARVED ACANTHUS-LEAF ENDS ON TURNED SUPPORTS; CARVED SQUARE BLOCKS WITH ROSETTES AND ACANTHUS PANELS; TURNED LEGS ON CARVED BUN FEET JOINED BY A TURNED AND CARVED H-STRETCHER. DARK WALNUT-TONE FINISH; UPHOLSTERED IN BROWN DIAMOND-PATTERN FABRIC WITH NAILHEAD TRIM. SOLD AS-IS: FINISH WEAR ON ARM TOPS, LIGHT SCUFFS. A STRIKING STATEMENT CHAIR FOR AN OFFICE, LIBRARY, ENTRY OR COLLECTOR OF ST. LOUIS HISTORY. EST. VALUE (ESTIMATE) BASED ON COMPARABLE 1920S CARVED REVIVAL ARMCHAIRS, ABOUT $450. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ANTIQUE CARVED WALNUT-FINISH ARMCHAIR, JACOBEAN / RENAISSANCE REVIVAL, FROM THE ST. LOUIS NEW MASONIC TEMPLE (1920S) ITEM DETAILS: ANTIQUE FURNITURE - ST. LOUIS HISTORY. ORIGINAL ARMCHAIR FROM THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS (1920S, ORIGINAL TO THE BUILDING). JACOBEAN / RENAISSANCE REVIVAL STYLE: HAND-CARVED CREST WITH SCROLLS AND ACANTHUS LEAVES, SCROLLED ARMS WITH CARVED KNUCKLE ENDS ON TURNED SPINDLE SUPPORTS, CARVED FLUTED LEGS ON BUN FEET, AND ARCHED CARVED FRONT STRETCHER WITH CENTRAL SHELL/SCROLL. DARK WALNUT-TONE FINISH; UPHOLSTERED BACK AND SEAT IN BROWN TEXTURED FABRIC WITH BRASS NAILHEAD AND GIMP TRIM. SOLD AS-IS: FINISH WEAR ON ARMS, FABRIC SOILING; UNDERSIDE WEBBING LOOSE/SAGGING (SEAT WILL NEED RE-WEBBING). GREAT FOR RESTORATION OR AS A STATEMENT PIECE. EST. VALUE (ESTIMATE) BASED ON COMPARABLE 1920S CARVED REVIVAL ARMCHAIRS, ABOUT $350. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ANTIQUE ST. LOUIS PUMP & EQUIPMENT CO. HAND-CRANK OIL DISPENSING PUMP ON STEEL STORAGE TANK - ORIGINAL TO THE ST. LOUIS NEW MASONIC TEMPLE ITEM DETAILS: ANTIQUE - ST. LOUIS HISTORY, TWICE OVER. ORIGINAL LUBRICATING-OIL DISPENSING STATION FROM THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS, WHERE THE BUILDING ENGINEERS USED IT TO OIL AND SERVICE THE TEMPLE'S MECHANICAL EQUIPMENT: AIR HANDLERS, FANS, MOTORS AND PUMPS. MADE RIGHT HERE IN ST. LOUIS BY THE ST. LOUIS PUMP AND EQUIPMENT CO. ("LIQUID HANDLING EQUIPMENT" TRIANGLE BADGE, SERIAL NO. 2036 10905). A CAST-IRON ROTARY HAND PUMP WITH CRANK HANDLE AND A SWING-OUT SPOUT, MOUNTED ON A HEAVY WELDED STEEL SQUARE STORAGE TANK WITH A HINGED FILL LID. TANK APPROX. 24 IN. X 24 IN. X 30 IN. TALL (MEASURED). OLD GRAY PAINT WITH HEAVY PATINA AND GRIME; WORKING CONDITION NOT TESTED. A GREAT PIECE OF EARLY BUILDING-ENGINEERING HISTORY: DISPLAY IT IN A BAR, GARAGE, MAN CAVE OR RESTAURANT, OR USE IT IN THE SHOP. EST. VALUE (ESTIMATE) BASED ON COMPARABLE ANTIQUE CABINET / TANK-MOUNTED OIL PUMPS, ABOUT $500. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ANTIQUE CUTLER-HAMMER BRASS STAGE LIGHTING DIMMER & SWITCH PANEL - ORIGINAL TO THE ST. LOUIS NEW MASONIC TEMPLE (1920S) ITEM DETAILS: ANTIQUE - ST. LOUIS HISTORY. ORIGINAL LIGHTING CONTROL PANEL FROM THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS, ORIGINAL TO THE BUILDING AS CONSTRUCTED IN THE 1920S. A HEAVY BRASS/BRONZE FACEPLATE WITH A CUTLER-HAMMER MFG. CO. ROTARY DIMMER (CAST DIAL EMBOSSED "THE CUTLER-HAMMER MFG. CO. / TO RAISE VOLTAGE" WITH ARROW) AND ITS CAST HANDLE, PLUS A COLUMN OF PERIOD PUSH-BUTTON AND TOGGLE SWITCHES, EACH WITH ITS ORIGINAL STAMPED BRASS LABEL PLATE: "CEILING FIXTURES," "STARS" AND "SPARE." THE "STARS" SWITCH MOST LIKELY CONTROLLED THE STARRY-CEILING EFFECT IN ONE OF THE TEMPLE'S LODGE ROOMS OR THE AUDITORIUM. DEEP ORIGINAL PATINA; SWITCH INTERNALS NOT TESTED. APPROX. 3 FT. TALL (ESTIMATE). A ONE-OF-A-KIND DISPLAY OR WALL PIECE FOR COLLECTORS OF MASONIC, THEATER OR ST. LOUIS ARCHITECTURAL HISTORY AND EARLY ELECTRICAL ANTIQUES. EST. VALUE (ESTIMATE) BASED ON COMPARABLE ANTIQUE CUTLER-HAMMER BRASS DIMMER PANELS AND ARCHITECTURAL SALVAGE, ABOUT $400. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ANTIQUE FRANK ADAM ELECTRIC CO. (ST. LOUIS) FUSE PANELBOARD, 16-CIRCUIT, IN STEEL CABINET - ORIGINAL TO THE ST. LOUIS NEW MASONIC TEMPLE (1920S) ITEM DETAILS: ANTIQUE - ST. LOUIS HISTORY, TWICE OVER. ORIGINAL ELECTRICAL FUSE PANELBOARD FROM THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS, ORIGINAL TO THE BUILDING AS CONSTRUCTED IN THE 1920S, AND MADE RIGHT HERE IN ST. LOUIS BY THE FRANK ADAM ELECTRIC CO. ("FA" LOGO). THE COPPER UNDERWRITERS' LABORATORIES INSPECTED-PANELBOARD NAMEPLATE READS FRANK ADAM ELECTRIC CO., ST. LOUIS, 125 VOLTS, 100 AMPERES, PATENT APPLIED FOR. BLACK COMPOSITION (SLATE-TYPE) FUSE BLOCKS WITH 16 COPPER EDISON-BASE PLUG-FUSE SOCKETS IN 8 NUMBERED PAIRS, COPPER LUGS, AND A BRASS "OIL HERE"-TYPE PLATE ON THE SIDE COVER, ALL IN THE ORIGINAL BLACK STEEL WALL CABINET. NOT FOR ELECTRICAL USE: DISPLAY / COLLECTOR PIECE ONLY. GREAT INDUSTRIAL WALL ART FOR A BAR, RESTAURANT OR MAN CAVE, AND A MUST FOR COLLECTORS OF ST. LOUIS MANUFACTURING AND MASONIC HISTORY. EST. VALUE (ESTIMATE) BASED ON COMPARABLE ANTIQUE FUSE PANELS AND ST. LOUIS-MADE ELECTRICAL ANTIQUES, ABOUT $300. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ANTIQUE INDUSTRIAL ENAMEL FLOOR LAMP ON CAST-IRON "GRIMM STAMP & BADGE CO., ST. LOUIS" BASE - ORIGINAL TO THE ST. LOUIS NEW MASONIC TEMPLE (1 OF 2) ITEM DETAILS: ANTIQUE - ST. LOUIS HISTORY. AN EARLY-20TH-CENTURY INDUSTRIAL WORK / STAGE FLOOR LAMP, ORIGINAL TO THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS. HEAVY ROUND CAST-IRON WEIGHTED BASE EMBOSSED "GRIMM STAMP & BADGE CO. ST. LOUIS" (A ST. LOUIS MANUFACTURER), TALL BLACK IRON PIPE STANDARD, AND PORCELAIN-ENAMEL REFLECTOR SHADE: WHITE INTERIOR, DARK GREEN EXTERIOR. SHADE ADJUSTS ON THE POLE. ORIGINAL CORD. PATINA, RUST AND ENAMEL CHIPPING AT THE SHADE RIM AS EXPECTED; WIRING NOT TESTED; BULB INCLUDED. A GREAT INDUSTRIAL LOFT / FARMHOUSE DECOR PIECE FOR COLLECTORS OF ST. LOUIS, MASONIC AND INDUSTRIAL ANTIQUES. EST. VALUE (ESTIMATE) BASED ON COMPARABLE ANTIQUE ENAMEL INDUSTRIAL FLOOR LAMPS, ABOUT $250. A SECOND TEMPLE LAMP (GRIMM SIGN CO. BASE) IS SOLD SEPARATELY AS THE NEXT LOT. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ANTIQUE INDUSTRIAL ENAMEL FLOOR LAMP WITH ADJUSTABLE SWIVEL ARM, CAST-IRON "GRIMM SIGN CO." BASE - ORIGINAL TO THE ST. LOUIS NEW MASONIC TEMPLE (2 OF 2) ITEM DETAILS: ANTIQUE - ST. LOUIS HISTORY. EARLY-20TH-CENTURY INDUSTRIAL WORK / STAGE FLOOR LAMP, ORIGINAL TO THE NEW MASONIC TEMPLE, 3681 LINDELL BLVD., ST. LOUIS. HEAVY ROUND CAST-IRON WEIGHTED BASE EMBOSSED "GRIMM SIGN CO." (ST. LOUIS), TALL BLACK IRON PIPE STANDARD WITH A CAST-IRON SWIVEL KNUCKLE AND OFFSET ARM, AND A LARGE PORCELAIN-ENAMEL REFLECTOR SHADE: GLOSSY DARK GREEN OUTSIDE, WHITE INSIDE. ORIGINAL CORD. PATINA AND LIGHT ENAMEL WEAR; WIRING NOT TESTED; NO BULB. GREAT INDUSTRIAL LOFT / FARMHOUSE DECOR PIECE FOR COLLECTORS OF ST. LOUIS, MASONIC AND INDUSTRIAL ANTIQUES. A MATCHING TEMPLE LAMP (GRIMM STAMP & BADGE CO. BASE) IS SOLD SEPARATELY AS THE PREVIOUS LOT. EST. VALUE (ESTIMATE) BASED ON COMPARABLE ANTIQUE ENAMEL INDUSTRIAL FLOOR LAMPS, ABOUT $250. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

ST. LOUIS HISTORY: BOX OF INCANDESCENT LIGHT BULBS FROM THE 1926 MASONIC TEMPLE - SYLVANIA EXCEL-LINE 150W 2500-HOUR, A19 & T20, CLEAR, MEDIUM BASE - ONE LOT ITEM DETAILS: SOLD AS ONE LOT - NOT COUNTED; BID ON THE BOX. A LARGE BOX OF CLEAR INCANDESCENT LIGHT BULBS, TAKEN FROM THE 35 TO 45 FT. HIGH CEILINGS OF THE 1926 MASONIC TEMPLE AT 3681 LINDELL BLVD. IN ST. LOUIS. INCLUDES SYLVANIA EXCEL-LINE LONG-LIFE 2500-HOUR 150W 130V BULBS, PLUS A19 AND T20 CLEAR BULBS, STORED IN REPLACEMENT-BULB SLEEVES. STANDARD E26 MEDIUM SCREW BASE. REPORTED GOOD. STANDARD INCANDESCENT BULBS HAVE LARGELY BEEN PHASED OUT OF U.S. RETAIL, SO THESE ARE HANDY FOR VINTAGE FIXTURES, CHANDELIERS, THEATRICAL OR WARM-GLOW LIGHTING, AND RESTORATION PROJECTS. CARTON APPROX. 28 IN. WIDE. GLASS, SO LOCAL PICKUP IS RECOMMENDED. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT. ORIGINAL ST. LOUIS MASONIC TEMPLE ITEM, PER CONSIGNOR.

SUPERCHUTE 30 IN. CONSTRUCTION DEBRIS / TRASH CHUTE SYSTEM - (9) CHUTE SECTIONS + (1) INTAKE HOPPER - USED ITEM DETAILS: SUPERCHUTE (MADE IN CANADA) WRAPAROUND DEBRIS CHUTE SYSTEM, 10 PIECES: (9) YELLOW POLYETHYLENE 30 IN. DIAMETER REGULAR CHUTE SECTIONS, ABOUT 48 IN. TALL, 5 MM WALL, APPROX. 37-39 LB EACH, WITH STEEL CHAIN/CABLE CONNECTORS AND HARDWARE; PLUS (1) STEEL-FRAMED INTAKE/DUMPING HOPPER WITH CHUTE COLLAR FOR LOADING DEBRIS AT A FLOOR LEVEL. HANGS FROM UPPER FLOORS INTO A DUMPSTER FOR DEMOLITION, ROOFING AND RENOVATION WORK. USED, IN VARIOUS STATES OF CONDITION: SCUFFS, DIRT, LABELS/STICKERS, SOME EDGE WEAR; INSPECT BEFORE BIDDING. OWNED EQUIPMENT, ORIGINALLY PURCHASED NEW (SOME SECTIONS FROM NU WAY, A CONTRACTOR EQUIPMENT DEALER, WHICH ACCOUNTS FOR THEIR DECALS). EST. RETAIL IF NEW (ESTIMATE): ABOUT $275 PER CHUTE SECTION AND $550 FOR THE HOPPER (9 X $275 + $550 = $3,025). BID BASIS: LOT; QTY: 10; SOLD AS ONE LOT.

JOBOX HEAVY-DUTY STEEL DROP-FRONT PIANO BOX JOB SITE TOOL CHEST ON CASTERS - USED, FULLY FUNCTIONAL ITEM DETAILS: JOBOX (CRESCENT/DELTA) HEAVY-DUTY STEEL JOB SITE PIANO BOX WITH DROP-DOWN FRONT PANEL, LIFT-UP LID WITH HANDLE, INTERNAL TRAY SHELF, AND LOCKING CASTERS; BROWN POWDER-COAT FINISH. SECURE LOCKABLE STORAGE FOR TOOLS AND MATERIALS ON CONSTRUCTION SITES. USED, FULLY FUNCTIONAL: LID, DROP FRONT AND CASTERS ALL WORK. PAINT/DRYWALL SPLATTER, SCUFFS AND WEAR. EST. RETAIL IF NEW: JOBOX 60 IN. DROP-FRONT PIANO BOX (2-683990-01) $2,013.05 AT HOME DEPOT. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

GRACO MAGNUM PROX7 CART AIRLESS PAINT SPRAYER W/ HOSE & SPRAY GUN - USED, NOT WORKING, FOR PARTS OR REPAIR ITEM DETAILS: GRACO MAGNUM PROX7 ELECTRIC AIRLESS PAINT SPRAYER ON FOLD-N-STORE CART WITH WHEELS, SUCTION TUBE, APPROX. 50 FT. AIRLESS HOSE, SPRAY GUN WITH TIP GUARD. SPRAYS UNTHINNED LATEX AND OIL-BASED PAINTS AND STAINS; UP TO 3,000 PSI; 0.31 GPM; SUPPORTS UP TO 75 FT. OF HOSE. USED WITH HEAVY PAINT RESIDUE. NOT WORKING - SOLD AS-IS FOR PARTS OR REPAIR. EST. RETAIL IF NEW: COMPARABLE GRACO MAGNUM X7 CART SPRAYER $419.00 AT HOME DEPOT (PROX7 IS THE PRO VERSION OF THE X7). BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

HEAVY-DUTY STEEL CONVERTIBLE HAND TRUCK / PLATFORM CART (2-WHEEL TO 4-WHEEL) - USED, WORKS ITEM DETAILS: HEAVY-DUTY STEEL CONVERTIBLE HAND TRUCK: USE UPRIGHT AS A 2-WHEEL DOLLY OR LAY DOWN AS A 4-WHEEL PLATFORM CART; LARGE REAR PNEUMATIC/RUBBER WHEELS PLUS TWO FRONT CASTERS; LOOP HANDLE. USED: WORN RED PAINT, RUST, PAINT/MASTIC RESIDUE; ROLLS AND CONVERTS AS IT SHOULD. EST. RETAIL IF NEW (ESTIMATE) BASED ON COMPARABLE HEAVY-DUTY 2-IN-1 STEEL CONVERTIBLE HAND TRUCKS, ABOUT $149.99. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

SAF-T-CART HEAVY-DUTY STEEL WELDER / WELDING MACHINE CART WITH TOW HANDLE - USED ITEM DETAILS: SAF-T-CART STEEL WELDING MACHINE CART: TWO-TIER STEEL SHELVES (WELDER ON TOP, ACCESSORIES/CYLINDER BELOW), TUBULAR STEEL FRAME WITH HOOKS FOR LEADS AND CABLES, TWO REAR WHEELS, AND A LONG T-HANDLE TOW BAR. USED: HEAVY PAINT LOSS AND SURFACE RUST ON SHELVES, WORN TIRES. EST. RETAIL IF NEW (ESTIMATE) BASED ON COMPARABLE SAF-T-CART WELDING/CYLINDER CARTS (SAF-T-CART CYLINDER CARTS RUN ABOUT $129-$178 NEW; WELDING MACHINE CARTS HIGHER), ABOUT $249.99. NOTE FOR SEQUENCING: PLACE THIS LOT IMMEDIATELY AFTER THE WELDER LOT. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

GROVES DOUBLE-SIDED GALVANIZED STEEL A-FRAME TRANSPORT RACK FOR GLASS / GRANITE / STONE SLABS, APPROX. 96 IN. - 4,000 LB CAPACITY - USED ITEM DETAILS: GROVES (GROVES.COM) HEAVY-DUTY DOUBLE-SIDED A-FRAME TRANSPORT/STORAGE RACK FOR GLASS, GRANITE, QUARTZ, STONE AND PANEL SLABS. GALVANIZED STEEL; APPROX. 96 IN. (8 FT.) LONG BASE. RUBBER-PADDED UPRIGHTS AND SERRATED BASE RAILS; FORKLIFT POCKETS IN THE BASE; LIFTING EYES ALONG THE TOP RAIL FOR CRANE/HOIST LIFTING. RATED MAXIMUM TOTAL WEIGHT 4,000 LBS - 2,000 LBS PER SIDE (DECAL). USED: NORMAL WEAR, SOME RUBBER PADDING WORN. EST. RETAIL IF NEW (ESTIMATE): COMPARABLE GROVES RACKS RUN ABOUT $1,435-$2,235 (SINGLE-SIDED 96 IN. TRUCK RACK, 4,000 LB) UP TO $3,240 (HEAVY-DUTY TRANSPORT RACK); DOUBLE-SIDED 96 IN. EST. $2,500. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

LARGE STEEL WATER PRESSURE TANK / VESSEL, APPROX. 30 IN. DIA. X 74 IN. L (~225 GAL.) ON PALLET - USED ITEM DETAILS: LARGE HORIZONTAL STEEL WATER PRESSURE VESSEL IN RED PRIMER, APPROX. 30 IN. DIAMETER X 74 IN. LONG (APPROX. 225 GALLONS BY VOLUME). BOLTED FLANGED INSPECTION/ACCESS PORT WITH LIFTING EYE ON ONE END; OPEN STEEL SUPPORT SKIRT WITH PIPING CONNECTION ON THE OTHER; LIFTING LUG ON TOP. FACTORY-LABELED CONNECTIONS: 2 IN. NPT SYSTEM CONNECTION AND A 3/4 IN. CONNECTION (ORANGE MANUFACTURER LABELS, TYPICAL OF COMMERCIAL ASME EXPANSION / HYDRO-PNEUMATIC TANKS). USED ON SITE AS A PRESSURIZED WATER SUPPLY TANK FOR HIGH-RISE MASONRY TUCKPOINTING; ALSO SUITED TO WATER STORAGE, HYDRO-PNEUMATIC/BOOSTER OR OTHER WATER SYSTEMS. SOLD ON A WOOD PALLET; FORKLIFT REQUIRED FOR LOADING. USED, SOLD AS-IS: SCUFFS, PAINT CHIPS AND SURFACE RUST SPOTS. NO NAMEPLATE/ASME TAG FOUND, SO PRESSURE RATING IS UNKNOWN; BUYER TO VERIFY SUITABILITY BEFORE PRESSURIZING. EST. RETAIL IF NEW (ESTIMATE) BASED ON COMPARABLE 200-250 GAL. STEEL PRESSURE/STORAGE TANKS, ABOUT $2,500. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

JOHN DEERE 10 CU. FT. TOW-BEHIND POLY UTILITY DUMP CART - USED ITEM DETAILS: JOHN DEERE TOW-BEHIND POLY UTILITY DUMP CART (10P STYLE), APPROX. 10 CU. FT., 650 LB. CAPACITY CLASS. RUST-PROOF GREEN POLY BED APPROX. 38 IN. W X 58 IN. L INSIDE, STEEL FRAME, TOW TONGUE WITH HITCH, AND TWO TURF-TREAD TIRES ON YELLOW JOHN DEERE WHEELS. TOWS BEHIND A LAWN TRACTOR, ATV OR UTILITY VEHICLE. USED: SCUFFS, STAINS AND PAINT MARKS ON THE BED; WORN DECAL; TIRES HOLD SHAPE (PRESSURE UNTESTED). EST. RETAIL IF NEW: JOHN DEERE 650 LB. 10 CU. FT. TOW-BEHIND POLY UTILITY CART (PCT-100JDC) $384.00 AT HOME DEPOT. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

CONCRETE MASONRY BLOCKS (CMU), 4" X 8" X 16", 55 FULL BLOCKS + 2 BROKEN, MIXED LOT ON PALLET - PER BLOCK X55 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER BLOCK, TIMES 55. FIFTY-FIVE FULL-SIZE GRAY CONCRETE BLOCKS ON A PALLET. SOME ARE UNUSED, AND SOME WERE LAID BEFORE AND STILL HAVE MORTAR ON THEM. TWO BROKEN BLOCKS ARE INCLUDED FREE. THEY'D WORK FOR RAISED BEDS, GARDEN WALLS, STEPS, PIER FOOTINGS, A SHED BASE, OR GENERAL REPAIR WORK. - QUANTITY: 55 FULL-SIZE BLOCKS, PLUS 2 BROKEN PIECES - SIZE: ABOUT 3-5/8" X 7-5/8" X 15-5/8" ACTUAL (4" X 8" X 16" NOMINAL) - TYPE: MOSTLY 3-CORE HOLLOW BLOCK, WITH A FEW SOLID OR CAP-STYLE PIECES MIXED IN - CONDITION: MIXED. SOME ARE UNUSED AND SOME ARE RECLAIMED, WITH LEFTOVER MORTAR, CHIPPED EDGES, AND MARKER WRITING. SOLD AS-IS. - PICKUP: ABOUT 1,200-1,400 LBS TOTAL. A FORKLIFT OR SKID STEER IS RECOMMENDED. OTHERWISE PLAN ON SEVERAL TRUCKLOADS LOADED BY HAND. EST. RETAIL (ESTIMATE): ABOUT $2.00 PER BLOCK (55 X $2.00 = $110.00). BID BASIS: PER BLOCK X55; QTY: 55; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

HEAVY-DUTY STEEL SLAB / GLASS / PANEL STORAGE RACK, 4-SLOT VERTICAL, APPROX. 72 IN. L X 40 IN. D X 80 IN. H - USED ITEM DETAILS: HEAVY-DUTY WELDED SQUARE-TUBE STEEL VERTICAL STORAGE RACK FOR STONE/GRANITE SLABS, GLASS, PLYWOOD, DRYWALL AND OTHER SHEET GOODS. FOUR VERTICAL SLOTS/BAYS WITH RUBBER-PADDED BASE RAILS AND PADDED UPRIGHTS TO PROTECT MATERIAL EDGES. FORKLIFT POCKETS IN THE BASE FOR MOVING LOADED. APPROX. 72 IN. LONG X 40 IN. DEEP X 80 IN. TALL (OWNER MEASUREMENTS). GREEN PAINT. USED: PAINT CHIPS, SCUFFS AND SURFACE RUST; STRUCTURALLY INTACT AS SHOWN. EST. RETAIL IF NEW (ESTIMATE) BASED ON COMPARABLE SLAB/GLASS STORAGE RACKS (GROVES MULTI-PURPOSE GLASS STORAGE SYSTEM FROM $968; HARP RACKS TO $3,330), ABOUT $1,200. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

HEAVY-DUTY BLACK STEEL PLATFORM BED FRAME / MATTRESS SUPPORT (BOX SPRING REPLACEMENT), APPROX. 80 IN. X 60 IN. (QUEEN) ITEM DETAILS: BLACK POWDER-COATED SQUARE-TUBE STEEL MATTRESS FOUNDATION / BOX-SPRING REPLACEMENT: WELDED STEEL GRID DECK WITH CLOSELY SPACED SLATS, APPROX. 80 IN. LONG X 60 IN. WIDE (QUEEN SIZE). TWO-PIECE FRAME WITH CENTER CONNECTOR (LABELED "UP"); NO BOX SPRING NEEDED. APPEARS UNUSED/LIKE NEW; LIGHT SCUFFS. EST. RETAIL IF NEW (ESTIMATE) BASED ON COMPARABLE HEAVY-DUTY QUEEN STEEL MATTRESS FOUNDATIONS, ABOUT $149.99. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

CLARKE FOCUS 28 IN. RIDE-ON AUTOMATIC FLOOR SCRUBBER, CYLINDRICAL BRUSH, 36V W/ ONBOARD CHARGER - USED, NOT WORKING, FOR PARTS OR REPAIR (NO REAR SQUEEGEE) ITEM DETAILS: CLARKE FOCUS RIDE-ON AUTOMATIC FLOOR SCRUBBER, MODEL FOCUS 28" CYL STRG WHL (CYLINDRICAL BRUSH DECK, STEERING WHEEL), CODE 00343K, SERIAL GK1888. 36 VDC, 80 AMPS; 900 KG; RATED FOR 10% GRADE. BUILT-IN BATTERY CHARGER, 120V AC INPUT. BATTERY PACK: (6) CROWN DEEP CYCLE 6V BATTERIES, 290 AH (5-HR). OPERATOR SEAT, KEY/CONTROL CONSOLE, DIAMOND-PLATE FLOORBOARD WITH PEDAL, SOLUTION AND RECOVERY TANKS WITH DRAIN HOSE, SCRUB DECK AND DRIVE WHEELS. REAR SQUEEGEE ASSEMBLY IS MISSING (NOT INCLUDED). PREVIOUS OWNER MARKING ("LIFE SCI") STENCILED ON SIDE. USED: SCUFFS, DUST AND WEAR; NOT WORKING - SOLD AS-IS FOR PARTS OR REPAIR. EST. RETAIL IF NEW: CURRENT CLARKE FOCUS II 28 IN. RIDER SCRUBBER $26,633 (CLEANFREAK; THIS ORIGINAL FOCUS MODEL IS DISCONTINUED). USED RIDE-ON SCRUBBERS IN WORKING ORDER TYPICALLY BRING A FRACTION OF NEW. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

KENNEDY KS-RW 8 IN. OS&Y RESILIENT-WEDGE GATE VALVE, 200 WWP, UL/FM, WITH VICTAULIC GROOVED COUPLING - FIRE PROTECTION / WATER (1 OF 2) ITEM DETAILS: KENNEDY VALVE (ELMIRA, NY) MODEL KS-RW 8 IN. OS&Y (OUTSIDE STEM AND YOKE) RESILIENT-WEDGE GATE VALVE, RED EPOXY-COATED DUCTILE IRON, 200 PSI WATER WORKING PRESSURE, UL LISTED AND FM APPROVED FOR FIRE-PROTECTION SERVICE. RISING STEM WITH CAST-IRON HANDWHEEL, SO OPEN/CLOSED POSITION IS VISIBLE AT A GLANCE. FLANGED END (8-BOLT, BOLTS IN PLACE) AND A GROOVED END FITTED WITH A VICTAULIC GROOVED COUPLING; A BRASS FITTING AND 36 IN. BRAIDED STAINLESS LINE ARE ATTACHED AT THE BONNET TAP. TYPICAL USES: FIRE SPRINKLER RISERS, FIRE PUMP SUCTION/DISCHARGE, WATER MAINS AND BUILDING WATER SERVICE. REMOVED FROM A NEW, NEVER-COMMISSIONED ASSEMBLY; LIGHT PAINT MARKS. EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR 8 IN. UL/FM OS&Y GATE VALVES, ABOUT $2,200. A SECOND MATCHING VALVE IS SOLD SEPARATELY AS THE NEXT LOT. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

KENNEDY KS-RW 8 IN. OS&Y RESILIENT-WEDGE GATE VALVE, 200 WWP, UL/FM, WITH VICTAULIC GROOVED COUPLING - FIRE PROTECTION / WATER (2 OF 2) ITEM DETAILS: KENNEDY VALVE (ELMIRA, NY) MODEL KS-RW 8 IN. OS&Y (OUTSIDE STEM AND YOKE) RESILIENT-WEDGE GATE VALVE, RED EPOXY-COATED DUCTILE IRON, 200 PSI WATER WORKING PRESSURE, UL LISTED AND FM APPROVED FOR FIRE-PROTECTION SERVICE. RISING STEM WITH CAST-IRON HANDWHEEL, SO OPEN/CLOSED POSITION IS VISIBLE AT A GLANCE. FLANGED END (8-BOLT, BOLTS IN PLACE) AND A GROOVED END FITTED WITH A VICTAULIC GROOVED COUPLING; THE BODY TAP IS OPEN (PLUGGED FITTING NOT INCLUDED). TYPICAL USES: FIRE SPRINKLER RISERS, FIRE PUMP SUCTION/DISCHARGE, WATER MAINS AND BUILDING WATER SERVICE. REMOVED FROM A NEW, NEVER-COMMISSIONED ASSEMBLY; PAINT SPLATTER ON THE BODY. EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR 8 IN. UL/FM OS&Y GATE VALVES, ABOUT $2,200. A MATCHING VALVE IS SOLD SEPARATELY AS THE PREVIOUS LOT. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

AIRLESSCO LP540 ELECTRIC AIRLESS PAINT SPRAYER ON CART - USED, NOT WORKING, FOR PARTS OR REPAIR ITEM DETAILS: AIRLESSCO LP540 PROFESSIONAL ELECTRIC AIRLESS PAINT SPRAYER WITH ELECTRONIC PRESSURE CONTROLS, ON WHEELED CHROME CART. PRIME/SPRAY VALVE, PRESSURE CONTROL KNOB, ON/OFF SWITCH, FLUID PUMP WITH SUCTION TUBE AND OUTLET FITTING, POWER CORD. SUITABLE FOR CONTRACTOR INTERIOR/EXTERIOR LATEX AND OIL-BASED COATINGS. HOSE AND SPRAY GUN NOT SHOWN/INCLUDED UNLESS NOTED. USED: PAINT OVERSPRAY, SURFACE RUST ON FRAME; NOT WORKING - SOLD AS-IS FOR PARTS OR REPAIR. EST. RETAIL IF NEW: DISCONTINUED; NEW-OLD-STOCK LP540 ABOUT $1,000-$1,700 (AVG. ~$1,350, LATESTCOST). USED MARKET ABOUT $350-$1,000 (TESTED UNITS $600-$800). BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

HAKO MINUTEMAN COMMERCIAL WIDE-AREA WALK-BEHIND VACUUM / SWEEPER, 115V (MC827969) - USED, WORKS (NEEDS BAG) ITEM DETAILS: HAKO MINUTEMAN COMMERCIAL WIDE-AREA WALK-BEHIND VACUUM (MC827969, SERIAL 17710155), APPROX. 28-30 IN. CLEANING PATH, FOR WAREHOUSES, PARKING DECKS, OFFICES AND LARGE CARPETED OR HARD FLOORS. 115V AC, 14 AMP; LEESON 1 HP, 3450 RPM MOTOR (MODEL M6C34DB31C) BELT-DRIVING THE VACUUM FAN; HEIGHT-ADJUST LEVER, LARGE REAR WHEELS, FOLDING CHROME HANDLE WITH LONG POWER CORD. SOLD BY CYCLONIC INDUSTRIAL SALES CO., ST. LOUIS (DECAL). PREVIOUS OWNER STENCILS ("HBD") AND ASSET TAG ON HOUSING. USED: SCUFFS, TAPE ON COVER; TESTED AND WORKS; NEEDS A NEW FILTER BAG (NOT INCLUDED). EST. RETAIL IF NEW (ESTIMATE) BASED ON COMPARABLE MINUTEMAN 28-30 IN. WIDE-AREA VACUUMS, ABOUT $1,800. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

ANTIQUE HOWE SCALE CO. (RUTLAND, VT) WOOD & CAST IRON PLATFORM BEAM SCALE - VINTAGE INDUSTRIAL / AMERICANA ITEM DETAILS: ANTIQUE / VINTAGE INDUSTRIAL. HOWE SCALE CO., RUTLAND, VERMONT, U.S.A. (CAST INTO THE PLATFORM FRAME) FLOOR-STANDING PLATFORM BEAM SCALE: CAST IRON BASE FRAME WITH ORIGINAL WOOD PLANK PLATFORM, TALL WOOD COLUMN, AND BRASS/BRONZE GRADUATED WEIGH BEAM (0-60 LB MAIN SCALE) WITH SLIDING POISE, ORIGINAL VERDIGRIS PATINA. HOWE BUILT SCALES IN RUTLAND FROM THE 1870S UNTIL THE COMPANY CLOSED IN THE 1980S; THIS STYLE DATES TO THE LATE 1800S/EARLY 1900S. A GREAT DISPLAY PIECE FOR A RESTAURANT, BAR, FARMHOUSE, MERCANTILE, LOFT OR INDUSTRIAL DECOR; ALSO A CONVERSATION PIECE FOR COLLECTORS OF AMERICANA. SOLD AS-IS, AS FOUND: WORN FINISH, PATINA, UNTESTED FOR ACCURACY; COUNTERWEIGHTS NOT SHOWN. EST. VALUE (ESTIMATE, NO NEW EQUIVALENT) BASED ON ANTIQUE HOWE PLATFORM SCALES, ABOUT $350. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.