(3) SIGMA ONE-LOK 6 IN. WEDGE-ACTION RESTRAINT GLAND SETS WITH MJ ACCESSORIES - GLAND, GASKET, BOLTS & NUTS (SLDEP6) - PER PIECE X3 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 3. SIGMA ONE-LOK SERIES SLDE 6 IN. WEDGE-ACTION RETAINER GLAND SETS FOR AWWA C151 DUCTILE IRON PIPE, ITEM SLDEP6. EACH CARTON IS A COMPLETE SET: (1) 6 IN. DI WEDGE-ACTION RETAINER GLAND WITH BLUE TWIST-OFF WEDGE BOLTS, (1) 6 IN. MJ GASKET AND (6) 3/4 X 3-1/2 IN. LOW-ALLOY STEEL T-BOLTS WITH NUTS. RESTRAINS MJ JOINTS ON WATER MAINS AND FIRE LINES WITH NO THRUST BLOCKS NEEDED. PRODUCED TO ANSI/AWWA C110/A21.10 AND C111/A21.11; 350 PSI RATED. NEW IN ORIGINAL CARTONS; ONE OPENED TO SHOW CONTENTS; CARTONS SHOW STORAGE WEAR. COMPLETE SETS ARE WORTH MORE THAN THE GLAND ALONE (COMPARE LOT 69). EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR 6 IN. WEDGE-ACTION RESTRAINT KITS WITH ACCESSORIES, ABOUT $135 EACH (3 X $135 = $405). BID BASIS: PER PIECE X3; QTY: 3; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(5) FLANGE BOLT & GASKET KITS, 150# - (2) 6 IN., (1) 3 IN., (1) 2-1/2 IN. JONES STEPHENS/PLUMBEST RED RUBBER KITS + (1) 3 IN. INSULATING GASKET KIT + BONUS THREADED FLANGE - PER PIECE X5 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 5. FIVE FLANGED-JOINT KITS, EACH FOR ONE ANSI CLASS 150 FLANGED CONNECTION (VALVES, PUMPS, FITTINGS ON WATER, FIRE AND HVAC PIPING): (2) JONES STEPHENS 6 IN. KITS G51106, EACH WITH A 1/16 IN. RED RUBBER FULL-FACE GASKET, A307A HEX BOLTS AND A563 NUTS; (1) PLUMBEST/JONES STEPHENS 3 IN. KIT G51-103 WITH A 1/16 IN. #20 SBR RED RUBBER FULL-FACE GASKET, A307A GR2 HEX BOLTS AND NUTS; (1) PLUMBEST/JONES STEPHENS 2-1/2 IN. KIT G51-125, SAME CONSTRUCTION; (1) ADVANCE PRODUCTS & SYSTEMS 3 IN. 150# FLANGE INSULATION GASKET KIT (EN GASKET, DW WASHERS, POLY SLEEVES) FOR DIELECTRIC ISOLATION BETWEEN DISSIMILAR METALS OR CATHODIC-PROTECTION BREAKS. BONUS: ONE USED CAST IRON THREADED COMPANION/REDUCING FLANGE (8-BOLT, APPROX. 9 IN. O.D., THREADED HUB APPROX. 3 IN.; SURFACE RUST) IS INCLUDED AT NO EXTRA CHARGE. KITS ARE NEW IN ORIGINAL BOXES; BOXES SHOW STORAGE WEAR. EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR 150# BOLT & GASKET KITS: AVERAGE ABOUT $29 EACH (5 X $29 = $145); THE INSULATING KIT ALONE TYPICALLY LISTS HIGHER. BID BASIS: PER PIECE X5; QTY: 5; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(9) 8 IN. STEEL PIPE SPLIT SLEEVES / HALF-SHELLS, 12 IN. LONG (WHEATLAND) + BONUS (7) SHORTER PIECES & (5) SMALL PIPE HALF-SHELLS - PER PIECE X9 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 9. (9) 8 IN. CARBON STEEL PIPE HALF-SHELLS (SPLIT SLEEVES), EACH 12 IN. LONG (MEASURED), CUT LENGTHWISE FROM WHEATLAND 8 IN. BLACK STEEL PIPE. PAIRS ARE WELDED AROUND AN EXISTING 8 IN. PIPE AS A FULL-ENCIRCLEMENT REPAIR OR REINFORCING SLEEVE (LEAKS, TIE-INS, BRANCH REINFORCEMENT), OR USED AS PIPE SADDLES / SHOES AT SUPPORTS. BONUS AT NO EXTRA CHARGE: (5) 6 IN. LONG AND (2) 3-1/4 IN. LONG HALF-SHELLS OF THE SAME 8 IN. PIPE (16 PIECES TOTAL), PLUS (5) SMALLER BLACK STEEL PIPE HALF-SHELLS: (3) APPROX. 2-1/2 TO 3 IN. PIPE X 12 IN. LONG AND (2) SHORT PIECES APPROX. 3 IN. LONG (MEASURED). UNUSED SHOP STOCK; MILL MARKINGS, SURFACE SCUFFS AND LIGHT SURFACE RUST. EST. RETAIL (ESTIMATE) BASED ON 8 IN. BLACK STEEL PIPE PRICING, ABOUT $25 PER 12 IN. HALF-SHELL (9 X $25 = $225; BONUS PIECES NOT COUNTED). BID BASIS: PER PIECE X9; QTY: 9; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

AGF TESTANDRAIN MODEL 1011 2 IN. INSPECTOR'S TEST & DRAIN VALVE, 5.6K ORIFICE, WITH PRESSURE RELIEF KIT - NEW, UNINSTALLED ITEM DETAILS: AGF MANUFACTURING TESTANDRAIN MODEL 1011, 2 IN. INSPECTOR'S TEST AND DRAIN VALVE FOR FIRE SPRINKLER SYSTEMS, WITH A 5.6K ORIFICE (EDP 0421056). ONE-HANDLE BALL VALVE WITH TEST / DRAIN / OFF POSITIONS AND A SIGHT GLASS, SO THE INSPECTOR CAN FLOW-TEST THE SYSTEM AND DRAIN IT FROM ONE VALVE. LEAD-FREE BRONZE BODY, 2 IN. NPT, RATED 400 WOG / 300 PSI. UL LISTED AND FM APPROVED. INCLUDES THE BAGGED PRESSURE RELIEF VALVE KIT AND FITTINGS. NEW AND UNINSTALLED, IN THE ORIGINAL BOX. EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR THE AGF 1011 2 IN., ABOUT $425. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

HARRINGTON 3-TON UNDER-HUNG BEAM CLAMP, 4 TO 12 IN. FLANGE RANGE (UBC030) - MADE IN USA - USED ITEM DETAILS: HARRINGTON HOISTS (A KITO GROUP COMPANY) 3-TON (6,000 LB.) UNDER-HUNG BEAM CLAMP, CODE UBC030, SERIAL UA037239. ADJUSTABLE SCISSOR-STYLE CLAMP ATTACHES TO THE BOTTOM FLANGE OF AN I-BEAM (4.0 TO 12.0 IN. FLANGE RANGE) TO CREATE A RIGGING POINT FOR A CHAIN HOIST OR COME-ALONG, WITH NO WELDING OR DRILLING. SCREW-ADJUSTED JAWS WITH T-HANDLE CRANK. ASME BTH-1 DESIGN CATEGORY B, SERVICE CLASS 0. MADE IN USA (MANHEIM, PA). APPROX. 26 IN. LONG. INCLUDES THE ATTACHED STEEL WIRE ROPE SLING WITH CABLE CLAMPS. USED: SCUFFED PAINT, WORKING CONDITION NOT VERIFIED. INSPECT BEFORE RATED USE. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

(53) HEAVY-DUTY GALVANIZED WIRE ROPE THIMBLES, APPROX. 4-1/2 IN. LONG, ASSORTED SIZES - PER PIECE X53 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 53. BOX OF 53 HEAVY-DUTY HOT-DIP GALVANIZED STEEL WIRE ROPE THIMBLES, APPROX. 4-1/2 IN. LONG X 3 IN. WIDE (MEASURED). THIMBLES PROTECT THE EYE OF A WIRE ROPE OR SYNTHETIC SLING FROM WEAR AND CRUSHING AT SHACKLES, HOOKS AND ANCHOR POINTS. USED FOR GUY WIRES, RIGGING, MOORING, CABLE RAILINGS AND FARM/FENCE BRACING. SIZED FOR APPROX. 5/8 TO 3/4 IN. WIRE ROPE. UNUSED; GALVANIZED FINISH WITH MINOR STORAGE MARKS. ASSORTED SIZES. EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR HEAVY-DUTY GALVANIZED THIMBLES OF THIS SIZE, ABOUT $4 EACH (53 X $4 = $212). BID BASIS: PER PIECE X53; QTY: 53; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

(96) CADDY (NVENT/ERICO) COPPER-PLATED ADJUSTABLE SWIVEL RING PIPE HANGERS, ASSORTED SIZES - PER PIECE X96 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 96. BOX OF 96 CADDY (NVENT / ERICO) COPPER-PLATED ADJUSTABLE SWIVEL RING (BAND) HANGERS, MOSTLY CADDY 101 SERIES, IN ASSORTED SIZES. EACH HAS A KNURLED SWIVEL INSERT NUT FOR 3/8 IN. THREADED ROD. USED TO HANG COPPER WATER, HYDRONIC AND REFRIGERATION PIPING FROM THREADED ROD; THE COPPER FINISH PREVENTS GALVANIC CORROSION ON COPPER TUBE. INCLUDES A FEW CADDY HANGER BRACKETS AND FASTENERS. UNUSED SHOP STOCK; SOME FINISH TARNISH. EST. RETAIL (ESTIMATE) BASED ON DISTRIBUTOR PRICING FOR COPPER-PLATED SWIVEL RING HANGERS, ABOUT $3 EACH (96 X $3 = $288). BID BASIS: PER PIECE X96; QTY: 96; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.

PALLET LOT: (4) BOXES OF BLACK & GALVANIZED THREADED PIPE FITTINGS - NIPPLES, ELBOWS, TEES, UNIONS, PLUGS, CAPS & REDUCERS, 1/2 IN. TO 4 IN. ITEM DETAILS: ONE LOT - EVERYTHING ON THE PALLET: FOUR BOXES OF THREADED STEEL PIPE FITTINGS IN BLACK IRON AND GALVANIZED, SIZES FROM ABOUT 1/2 IN. UP TO 4 IN. INCLUDES A BOX OF LARGE-DIAMETER BLACK STEEL NIPPLES (MANY WITH RETAIL TAGS STILL ON), A BOX OF 1/2 TO 1 IN. NIPPLES WITH ELBOWS, TEES AND PRE-MADE SWING-JOINT ASSEMBLIES, A BOX OF MIXED MALLEABLE IRON ELBOWS, TEES, COUPLINGS, UNIONS, BELL REDUCERS AND NIPPLES, AND A BOX OF SQUARE-HEAD PIPE PLUGS AND CAPS (MANY 2 IN.). SEVERAL HUNDRED PIECES TOTAL. GREAT FOR A PLUMBING, GAS, FIRE SPRINKLER OR STEAM/HYDRONIC CONTRACTOR, A SHOP STOCK-UP, OR INDUSTRIAL PIPE FURNITURE AND SHELVING BUILDS. MOSTLY UNUSED SHOP STOCK; SOME SURFACE RUST, TAPE AND THREAD-SEALANT RESIDUE ON A FEW. EST. RETAIL (ESTIMATE) FOR THE ASSORTMENT, ABOUT $750. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

LOT OF HEAVY HEX STRUCTURAL BOLTS & NUTS - HOT-DIP GALVANIZED 3/4 IN. SHORT BOLTS, APPROX. 3-1/2 IN. HEX BOLTS & MJ T-HEAD BOLTS (3 BOXES) ITEM DETAILS: ONE LOT - THREE BOXES OF HEAVY-DUTY BOLTS AND NUTS. (1) A LARGE BOX OF HOT-DIP GALVANIZED HEAVY HEX BOLTS, APPROX. 3/4 IN. DIAMETER X 1-3/4 IN. LONG (HEAD-MARKED VTC), WITH MATCHING GALVANIZED HEAVY HEX NUTS; TYPICAL FOR STEEL CONNECTIONS, UTILITY AND TOWER WORK. (2) A BOX OF APPROX. 5/8 IN. X 3-1/2 IN. HEAVY HEX BOLTS WITH GALVANIZED NUTS. (3) A BOX OF APPROX. 3/4 IN. X 4-1/2 IN. MECHANICAL JOINT (MJ) T-HEAD BOLTS WITH NUTS FOR DUCTILE IRON PIPE FITTINGS AND VALVES. UNUSED SHOP STOCK; THE GALVANIZED BOLTS ARE CLEAN AND THE T-BOLTS HAVE SURFACE RUST. EST. RETAIL (ESTIMATE) FOR THE ASSORTMENT, ABOUT $175. BID BASIS: LOT; QTY: 1; SOLD AS ONE LOT.

(8) CARLON 5 IN. SCHEDULE 40 PVC ELECTRICAL CONDUIT COUPLINGS (E940P) - PER PIECE X8 ITEM DETAILS: SOLD BY THE PIECE - BID IS PER PIECE, TIMES 8. CARLON (ABB / LAMSON & SESSIONS) E940P 5 IN. RIGID PVC CONDUIT COUPLINGS, GRAY, FOR JOINING SCHEDULE 40 AND SCHEDULE 80 PVC ELECTRICAL CONDUIT. SOLVENT-WELD SLIP FIT. UL LISTED. USED ON UNDERGROUND SERVICE ENTRANCES, UTILITY AND SITE FEEDERS. NEW, UNUSED. EST. RETAIL (ESTIMATE) BASED ON HOME DEPOT / SUPPLY-HOUSE PRICING FOR 5 IN. PVC CONDUIT COUPLINGS, ABOUT $11.98 EACH (8 X $11.98 = $95.84). BID BASIS: PER PIECE X8; QTY: 8; BID IS PER UNIT; TOTAL BID IS MULTIPLIED BY QUANTITY.