69" WIDE X 8" STAINLESS STEEL OVER SHELF WITH RAISED REAR EDGE AND HEAVY-DUTY TRIANGULAR WALL SUPPORT BRACKETS

CLEVELAND STEAMCRAFT COMMERCIAL COUNTERTOP STEAMER WITH STAINLESS STEEL CABINET, FRONT-HINGED DOOR, MULTIPLE INTERIOR PAN RACK POSITIONS, MANUAL/TIMED CONTROLS, AND STAINLESS STEEL EQUIPMENT STAND WITH LOWER SHELF.

96" WIDE X 28" STAINLESS STEEL HEAVY-DUTY OPEN SHELVING UNIT WITH (5) FULL-WIDTH SHELF LEVELS, INCLUDING TOP SHELF, WELDED TUBULAR FRAME CONSTRUCTION AND ADJUSTABLE BULLET FEET.

COMMERCIAL STAINLESS STEEL SINGLE-COMPARTMENT HAND WASH SINK WITH INTEGRAL BACKSPLASH, DEEP SINK BASIN, ROUNDED FRONT AND SIDE EDGES, TALL GOOSENECK FAUCET WITH HOT AND COLD CONTROLS, DRAIN AND FOUR-LEG SUPPORT BASE.

K-GUARD WET CHEMICAL CLASS K FIRE EXTINGUISHER WITH STAINLESS STEEL CYLINDER, DISCHARGE HOSE, PRESSURE GAUGE, SAFETY PIN AND WALL-MOUNT BRACKET. DESIGNED FOR CLASS K COOKING OIL AND GREASE FIRES. INSPECTION TAG VISIBLE AND MARKED 2026.

L SHAPED STAINLESS STEEL TWO-COMPARTMENT SINK WITH LARGE DRAINBOARD WORK SURFACES ON BOTH SIDES, INTEGRAL BACKSPLASH, DUAL DRAINS, WALL-MOUNT FAUCET ASSEMBLIES AND TUBULAR STAINLESS STEEL LEGS. LOWER STAINLESS STEEL UNDERSHELF PROVIDED BENEATH LEFT DRAINBOARD.

RIGHT SIDE STAINLESS STEEL SOILED DISH TABLE / PRE-RINSE SINK ASSEMBLY WITH INTEGRAL SINK BASIN, LARGE DRAINBOARD/WORK SURFACE, HIGH BACKSPLASH, WALL-MOUNTED OVER SHELF, SLANTED DISH RACK STORAGE SHELF, PRE-RINSE SPRAYER AND WASTE DISPOSER.

LEFT SIDE STAINLESS STEEL CLEAN TABLE W/ 90-DEGREE CURVED ROLLER CONVEYOR / DISH TABLE ASSEMBLY WITH GRAVITY ROLLERS, STRAIGHT INFEED AND OUTFEED SECTIONS, INTEGRAL STAINLESS STEEL DRAINBOARD, RAISED PERIMETER EDGES, TUBULAR STAINLESS STEEL LEGS AND OVERHEAD TUBULAR RACK FRAME.

55" W X 25" D MOBILE STAINLESS STEEL 5-TIER SHEET PAN / TRAY RACK WITH OPEN-SLAT SHELVES, HEAVY-DUTY WELDED FRAME AND FOUR SWIVEL CASTERS.

96" WIDE X 28" STAINLESS STEEL HEAVY-DUTY OPEN SHELVING UNIT WITH (5) FULL-WIDTH SHELF LEVELS, INCLUDING TOP SHELF, WELDED TUBULAR FRAME CONSTRUCTION AND ADJUSTABLE BULLET FEET.

108" W X 28" D STAINLESS STEEL WORK TABLE WITH FULL-LENGTH REAR BACKSPLASH, HEAVY-DUTY TUBULAR LEGS, ADJUSTABLE FEET AND LOWER UNDERSHELF

71" W X 30" D HEAVY-DUTY STAINLESS STEEL WORK TABLE WITH THREE-SIDED RAISED BACKSPLASH, WELDED TUBULAR LEG FRAME AND CROSS-BRACING

71" W X 29" D HARDWOOD BUTCHER BLOCK WORK TABLE WITH THICK SOLID WOOD WORK SURFACE, THREE-SIDED RAISED WOOD SPLASH, AND STAINLESS STEEL UNDERSHELF PAN RACK FRAME.

MOFFAT TURBOFAN STACKED COMMERCIAL ELECTRIC CONVECTION OVEN AND HEATED HOLDING/PROOFING CABINET WITH STAINLESS STEEL EXTERIORS, GLASS VIEWING DOORS, ADJUSTABLE PAN SLIDES, MANUAL CONTROLS AND TEMPERATURE CONTROLS. UPPER OVEN FEATURES CONVECTION FAN, STEAM CONTROL, BAKE TIMER AND ADJUSTABLE THERMOSTAT. LOWER CABINET FEATURES HUMIDITY AND TEMPERATURE CONTROLS.

(4) 42" X 18" SECTIONS OF HEAVY-DUTY WIRE SHELVING SYSTEM CONSISTING OF MULTIPLE CONNECTED SHELVING SECTIONS WITH SHARED VERTICAL POSTS BETWEEN ADJOINING SECTIONS. OPEN WIRE SHELVES WITH ADJUSTABLE SPLIT-SLEEVE POST COLLARS

(4) 42" X 18" SECTIONS OF HEAVY-DUTY WIRE SHELVING SYSTEM CONSISTING OF MULTIPLE CONNECTED SHELVING SECTIONS WITH SHARED VERTICAL POSTS BETWEEN ADJOINING SECTIONS. OPEN WIRE SHELVES WITH ADJUSTABLE SPLIT-SLEEVE POST COLLARS

48" ALUMINUM DUNNAGE RACK

18" W X 27" STAINLESS STEEL COMMERCIAL WORK TABLE WITH FLAT WORK SURFACE, REAR BACKSPLASH, OPEN BASE AND FOUR TUBULAR LEGS.

(2) 48" W X 24" D WIRE SHELVING UNITS WITH SHARED CENTER SUPPORT POLES. EACH UNIT INCLUDES MULTIPLE ADJUSTABLE OPEN-WIRE SHELVES WITH METAL UPRIGHT POSTS AND COLLAR-STYLE SHELF CONNECTIONS

(2) 48" W X 24" D WIRE SHELVING UNITS WITH SHARED CENTER SUPPORT POLES. EACH UNIT INCLUDES MULTIPLE ADJUSTABLE OPEN-WIRE SHELVES WITH METAL UPRIGHT POSTS AND COLLAR-STYLE SHELF CONNECTIONS

(2) 42" X 18" SECTIONS OF HEAVY-DUTY WIRE SHELVING SYSTEM CONSISTING OF MULTIPLE CONNECTED SHELVING SECTIONS WITH SHARED VERTICAL POSTS BETWEEN ADJOINING SECTIONS. OPEN WIRE SHELVES WITH ADJUSTABLE SPLIT-SLEEVE POST COLLARS

BUTCHER BOY FLOOR-MODEL VERTICAL BAND SAW WITH STAINLESS STEEL WORK SURFACE, ADJUSTABLE PRODUCT GUIDE/FENCE, SLIDING PRODUCT CARRIAGE, BLADE GUARD AND ENCLOSED BASE. INCLUDES MULTIPLE SPARE BAND SAW BLADES AS PICTURED.

(2) 48" W X 24" D WIRE SHELVING UNITS WITH SHARED CENTER SUPPORT POLES. EACH UNIT INCLUDES MULTIPLE ADJUSTABLE OPEN-WIRE SHELVES WITH METAL UPRIGHT POSTS AND COLLAR-STYLE SHELF CONNECTIONS

(2) 42" X 18" SECTIONS OF HEAVY-DUTY WIRE SHELVING SYSTEM CONSISTING OF MULTIPLE CONNECTED SHELVING SECTIONS WITH SHARED VERTICAL POSTS BETWEEN ADJOINING SECTIONS. OPEN WIRE SHELVES WITH ADJUSTABLE SPLIT-SLEEVE POST COLLARS

18" D X 30" W GREEN EPOXY-COATED WIRE SHELVING UNIT WITH (5) ADJUSTABLE WIRE SHELVES AND (4) POST CONSTRUCTION. OPEN-WIRE DESIGN WITH ADJUSTABLE SHELF COLLARS.